Descaling a tankless water heater means circulating a cleaning liquid through its heat exchanger to dissolve mineral deposits, and the manufacturer documents we could read say to do it at least once a year but do not agree on what to circulate. Rinnai’s flush page names undiluted white vinegar and says never to use chemical solutions of any kind. Navien’s page names an approved descaling solution or household white vinegar. State Water Heaters’ gas tankless manual describes no descaling procedure in its maintenance section. Rinnai and Navien each also steer owners toward a professional. Because the procedure and the liquid are model-specific, the manual for your exact unit decides; this page shows you what to look for in it.
Safety first. Descaling means working on a gas or electric appliance, closing water and gas valves, attaching hoses and handling hot water and a cleaning liquid. Cut power and gas as the manual directs, and stop if anything does not match your manual. This page does not give you a procedure for your unit.
Descaling, Flushing And Draining Are Neighboring Jobs
Manufacturers use different words for the same maintenance, and the storage tank flush is a different job. Navien calls it descaling, also known as flushing. Rinnai calls it flushing and gives it a 13-step page. Rheem says tankless heaters require periodic descaling instead of flushing, which sets them apart from the storage tank procedure in our flushing guide. Draining the unit for freezing weather is separate again: the State Water Heaters manual lists unit draining and power outage freeze protection as its own section.
What Each Maker Says
| Maker and document | Interval | What to circulate | Who |
|---|---|---|---|
| Rinnai, 13-step flushing page | Flush mineral deposits at least once a year. The Rinnai FAQ says the time between maintenance depends on the water quality in your home. | 4 gallons (15.1 liters) of undiluted white vinegar. Never use chemical solutions of any kind. | The flush page gives owner steps; the Rinnai FAQ says the process should be completed by a professional installer. |
| Navien, Descaling a Tankless Water Heater | At least once a year; more often with higher mineral content, a higher set temperature or more hot water use. | An approved tankless descaling solution or household white vinegar, circulated for at least 45 minutes, then a fresh water flush of at least 10 minutes. | Navien says descaling can be done by a professional or by yourself, and recommends hiring a professional. |
| State Water Heaters, residential gas tankless manual (THR series) | The manufacturer recommends having the unit checked once a year or as necessary by a licensed technician or qualified person. | No descaling procedure appears in the maintenance section we read. The controller has a Descale Mode setting. | A licensed technician or qualified person for the annual check. |
| Rheem, How Often To Flush Your Water Heater | Periodic descaling instead of flushing; no interval in that article. | Not described. | Not described. |
| Noritz | Not read. | Not read. | Not read. Noritz’s descaling page returned a bot-verification screen to us, so we state nothing about it. |
Rinnai also lists a technical bulletin titled Higher Vinegar Concentration for Descaling (TB-181). The text of that bulletin did not extract cleanly, so we state no vinegar strength.
Where They Conflict
The clearest conflict is the cleaning liquid, and it is why a generic how-to cannot be trusted for your unit. Rinnai’s flush page says to use undiluted white vinegar and never chemical solutions of any kind, giving the reason that your home’s drinking and bathing water most likely flows through the heater and chemical cleaners could be extremely harmful to health. Navien’s page lists an approved descaling solution or household white vinegar (the page marks vinegar with an asterisk whose note we could not read) and tells owners to follow all safety requirements and manufacturer directions with chemicals. Both statements can be true of their own products. Neither page, as we read it, says what is safe for a different brand.
An approved descaling solution and vinegar are not interchangeable choices. Rinnai’s page names undiluted white vinegar and says never to use chemical solutions of any kind, while Navien’s page names an approved tankless descaling solution or household white vinegar for its own units. We found no statement in the documents we read that a product approved for one brand is acceptable for another brand’s unit. For your unit, the liquid, the quantity and the circulation time are whatever your own manual says, and if it names a specific product, that is the product to use.
The documents also pull in two directions on who should do the work. Rinnai’s flush page is written as an owner procedure, while its FAQ says a professional installer should complete it; Navien describes DIY descaling and then recommends hiring a professional. We do not read that as permission or prohibition. It tells you the manufacturers treat this as work with real ways to go wrong.
The State manual’s gap is a gap in the document we read, not proof that no procedure exists for that model. The same manual lists an optional X3 cartridge accessory, described as added to an M model heater to prevent scale buildup and eliminate the need for annual descaling maintenance. That is State’s description of its own accessory. Navien likewise offers a scale prevention system. We have not evaluated either, and we do not say they replace descaling.
What The Rinnai And Navien Procedures Share
Both procedures circulate the liquid through the heater from a bucket and then rinse, and both rely on valves and hoses your unit may or may not have. Rinnai’s steps start by turning off the power source and the gas or circuit breaker, then closing the three water valves, removing the purge port caps slowly, attaching hosing lines and, in some cases, using a sump pump; they end with closing the valves, replacing the caps and running a hot tap until the air has cleared. Navien lists drain hoses, a submersible pump and a 5-gallon collection bucket, and says the vinegar or solution should circulate for at least 45 minutes before a fresh water flush of at least 10 minutes. It points readers to written instructions on its product downloads page.
If your unit has no service valves with purge ports, or you do not own a pump and hoses, that is a reason to ask a professional, not a reason to improvise. Rinnai says the hosing lines must be long enough to reach between the water heater and a bucket and tells readers to consult the manufacturer’s manual or contact the manufacturer for exact instructions. These are summaries of two makers’ pages, not a procedure for any other model: the valves, hoses, liquid and steps your unit needs are in your own manual.
Want a technician to descale it? Call (717) 500-8528 with the make and model from the rating plate.
Hazards And The Warranty Note
- Gas and power. Both makers start with turning power and gas off. If you smell gas, leave and use our shut-off guide. Do not restart the unit until the manual says how.
- Hot water and pressure. Rinnai says there may be pressure when removing the purge port valve caps, and says to confirm the hot water valve is completely shut off.
- Cleaning liquid in the plumbing. Rinnai’s reasoning about drinking and bathing water is why the final fresh-water rinse matters; Navien specifies at least 10 minutes of fresh water.
- Warranty. Navien says that if descaling is done incorrectly and the water heater is damaged, you could void the warranty. Read your warranty before you start; this page does not say what yours covers.
- Venting and gas connections. The State manual says the intake and venting system should be checked annually for leaks, corrosion, blockages or damage; that is separate from descaling. See our venting guide and carbon monoxide guide.
Mineral Content And Your Interval
Navien and Rinnai both tie the interval to the minerals in the water, and neither page we read gives a figure for Lancaster. Navien says the higher the level of mineral content in your water, the higher the set water temperature and the more hot water your home uses, the more often you will need to descale. Rinnai’s FAQ says the time between necessary maintenance will depend on the water quality in your home. This page does not say whether your water is high in minerals. Public suppliers publish reports and private wells have none; see how to find out and water heaters on well water. The temperature setting is its own question; see our temperature guide.
As for why to descale, Navien says deposits can erode and clog the walls inside the heat exchanger, reducing efficiency and flow and potentially causing premature failure, and that neglecting descaling can lead to damage to the heat exchanger and interfere with normal heating. Rinnai’s FAQ says scale and lime can shorten the water heater’s lifespan over time. Reduced flow and poor heating also have other causes, so do not diagnose from them; see our no hot water guide.
Who Should Do It
The practical question is whether to do it yourself at all, and both manufacturers point toward a professional. If you hire one, ask for the work in writing against your manual: what liquid, how long it circulated, how the unit was rinsed and restarted, and what it did about the inlet filter, which both the Rinnai FAQ and the State manual list as a periodic check. Navien says the cost of professional descaling varies with many factors, and we state no price. For service, see tankless water heater repair in Lancaster, PA, and our Rinnai, Navien and Noritz guides.
Sources Used
Rinnai, 13-Step Tankless Water Heater Flushing Procedure page and FAQ (rinnai.us); Navien, Descaling a Tankless Water Heater (navieninc.com); State Water Heaters, residential gas tankless manual (THR-160, THR-180, THR-199); Rheem, How Often To Flush Your Water Heater. Noritz’s descaling page could not be read. Details and excerpts are in our claims registry.
Need A Tankless Water Heater Descaled?
Service requests and emergency service are available 24/7 across Lancaster City and Lancaster County.
Call For Emergency ServiceTankless Descaling FAQ
Can I use vinegar to descale a Rinnai or Navien tankless water heater?
Both makers name vinegar, with different wording. Rinnai’s flush page says to use 4 gallons of undiluted white vinegar and never chemical solutions of any kind; Navien names an approved descaling solution or household white vinegar. They are not interchangeable: use only the liquid your own manual names for your exact model, and do not carry a product or method from one brand over to another.
How often should a tankless water heater be descaled?
Rinnai and Navien both say at least once a year. Navien says more often with higher mineral content, a higher set temperature or more hot water use, and Rinnai says the time between maintenance depends on your water quality. We give no interval of our own.
Do I need a pump to descale a tankless water heater?
Navien lists a submersible pump among the equipment, and Rinnai says some cases may require a sump pump. What your unit needs depends on its valves and its manual; we describe no pump-free method because no manufacturer document we read does.
Can descaling void my tankless water heater warranty?
Navien says it could if descaling is done incorrectly and the heater is damaged. Read your own warranty, and ask a professional to document the work.
Is descaling a DIY job?
Both Rinnai and Navien point toward a professional. Rinnai’s FAQ says a professional installer should complete the process, and Navien recommends hiring a professional while describing the owner steps. If you proceed yourself, follow your manual and stop if your unit lacks the valves it describes.
Who can descale a tankless water heater near me in Lancaster County?
Lancaster Water Heater Pros services water heaters across Lancaster City and Lancaster County. Call (717) 500-8528 with the make and model. Service requests are accepted 24/7.